Welcome to Enisize for Air Springs, Enidine Incorporated's Air Spring Selection Software and Product Reference Guide. Enisize for Air Springs (E.A.S.) can help you size the proper Air Spring for your application. Once installed on your PC, just launch the program from the E.A.S. ICON on your desktop. The program will need a few input parameters to provide you with Air Spring recommendations. You can review all of the important technical information required to specify the Air Spring in your application. Your results can be viewed within the program or saved onto your desktop in a convenient PDF format for printing or e-mail. For more product information or pricing, please contact our customer service department at 1.800.852.8508 or email us at industrialsales@enidine.com.

Click on the link to download the latest Sizing Software from Enidine Incorporated. Choose the location directory for the download to take place and open the file and follow the onscreen instructions. Download The Enisize for Air Springs Software Here: Enisize for Air Springs Sizing Software (120mb) Click Here for a List of Suported Operating Systems Instructions for Enisize for Air Springs Download: (please read)

Enisize For Air Springs Installation

Enisize for Air Springs (E.A.S.) can be downloaded from the link above to a network or personal computer. Once you have downloaded the file to a directory of your choice. Double click the file called "EAS Setup.zip". It will then ask you where you would like to save the program files(the default directory is C:\Windows\Desktop). Click the button "Extract" and the files will be saved in C:\Windows\Desktop\EAS. When it is done click "Close" to close WinZip. Go to the directory that the program was installed and double click the file "Setup.exe" to launch the installer program. Please follow the onscreen instructions.

You may need to restart your computer twice during installation, depending upon your P.C. settings.

1. Open the folder "EAS Setup" and double-click the file "setup.exe."

2. A pop-up window will appear "This will install Enisize for Air Springs" - click "OK" and the install process will begin, this may take a few minutes.

3. You may receive a message "The Microsoft .NET framework has been installed. Please restart your computer." Click "OK" and restart your computer. If you DO NOT receive this message, go to step 5.

4. After restarting, select the directory containing the Enisize for Air Springs Software and double-click "setup.exe". This will resume the installation.

5. You may receive a message "Enisize for Air Springs requires Microsoft Data Access Components version 2.7 or higher." If so, click "OK"; the installation will be temporarily interrupted. Close and go to the next step, otherwise go to step 12.

6. Select the folder "EAS Setup" containing the Enisize for Air Springs Software.

7. Go to the "Microsoft" folder, and double-click on "MDAC_INSTALL.exe"

8. Check the box next to "I accept the terms of the preceding license agreement" and click "Next".

9. Click "Finish" to install the Microsoft Data Access Components.

10. Click "Finish" and restart your computer.

11. After restarting, go to the folder "EAS Setup" containing the Enisize for Air Springs Software and double-click "setup.exe". This will restart the installation.

12. Wait for the E.A.S. Wizard to appear and follow the instructions.

13. Notice the message "Enisize for Air Springs has been successfully installed." Click "Close".

14. Locate the newly created ICON on your desktop, double click to launch E.A.S. and wait, while a brief introduction loads and E.A.S. starts on the "ACTUATOR SELECTION" Tab.

Updates to E.A.S. will be available for quick download located here so check back often for updates.
Please report any problems with this program to our IT department at 1.800.852.8508.